Every change in your home is a chance to improve its energy efficiency.
Whether you’re replacing a window, re-painting, adding a room, or redesigning your whole house — your renovation choices can make your home cooler, more comfortable, and cheaper to run.

Renovating is the perfect time to think long-term: better insulation, smarter design, natural light and airflow, and materials that last in our tropical climate. Each improvement adds up — cutting energy use, saving money, and creating a home that works with the climate, not against it.

This action plan will guide you step-by-step through planning, budgeting, and building with energy efficiency in mind — helping you make every decision count for comfort, savings, and sustainability.

Start with a clear goal. Are you trying to:

• Reduce heat inside the home?

• Cut energy costs?

• Add shade or improve ventilation?

• Upgrade an old, inefficient space?

Write down your priorities and budget early — they’ll guide every decision that follows.
Tip: Focus first on passive design improvements (like insulation and shading) before upgrading appliances or solar.

Walk through your home and note:

• Where heat builds up during the day.

• Drafty windows and doors.

• Dark areas that need better natural light.

• Rooms that are hard to cool or ventilate.

• Dark coloured walls which absorbs heat

You can also get a home energy assessment to identify the biggest opportunities for improvement.

Budget realistically — not just for materials and labour, but for energy-saving upgrades.
Include:

• Insulation for ceilings, walls and floors.

• Window upgrades — consider double glazing or low-e glass.

• Shading — pergolas, eaves or well-placed trees.

• Appliances — energy-efficient lighting, fans and air conditioners.

Tip: Look for rebates, grants or Council programs that support energy-efficient retrofits.

A simple renovation timeline might look like this: 

Plan for the build to occur outside the wet season where possible — it’s easier to manage materials and moisture.

The materials you choose for your renovation have a huge impact on how well your home stays cool, how much energy it uses, and how long it lasts in our tropical climate. When planning upgrades, look for materials that work with the local conditions — heat, humidity, rain and termites — rather than against them.

Below are key areas to focus on.

Insulation

Insulation is one of the most effective ways to keep heat out and comfort in.
A well-insulated home stays cooler in the day and holds onto cooler night air for longer.

• Ceiling insulation should always be your first priority — heat rises, and the roof is often the main source of heat gain.
• Wall insulation can make a big difference if you’re re-cladding or building new walls.
• Underfloor insulation is useful for raised homes, especially those on piers, to reduce radiant heat from the ground.

Tips:

1. Check the R-value — the higher it is, the better it resists heat transfer.
2. Use insulation that suits tropical conditions — moisture-resistant and vermin-proof.
3. Make sure it’s installed snugly with no gaps or compression. Even small voids can halve performance.

Local suppliers: Kingspan, Bradford, and CSR offer a range suitable for tropical climates.

Windows and Glazing

Windows connect us to light and air — but they can also let in a lot of heat. The right glazing and frames make a big difference.

• Low-E or tinted glass helps block infrared heat while letting in light.
• Double glazing improves insulation, but make sure it’s properly sealed to prevent condensation in humid conditions.
• Window frames matter too — uPVC and timber have lower conductivity than aluminium, meaning less heat transfer.
• External shading (awnings, louvres, or deep eaves) prevents direct sunlight from hitting the glass in the first place.

Tip: Focus shading on east- and west-facing windows, where the morning and afternoon sun is strongest

Local options: Breezway

Paints and Surface Coatings

Your roof and walls are the biggest exposed surfaces on your home — and the first line of defence against the sun. The colour and finish you choose can have a surprisingly large effect on indoor temperatures.

• Light-coloured or reflective paints reduce heat absorption by bouncing sunlight away.
• Cool roof coatings and reflective membranes can lower roof surface temperatures by several degrees, cutting heat transfer inside.
• Insulating paints use ceramic or microsphere additives to create a small thermal barrier — useful as an extra layer, but not a substitute for insulation.
• Wall finishes that use lighter tones or textured coatings can also reduce heat gain.

Tips:

1. Prioritise your roof and upper walls — they receive the most direct sunlight.
2. Choose products with a high Solar Reflectance Index (SRI) for the best performance.
3. Re-coat as needed — reflective paints can lose effectiveness over time.
4. Avoid highly glossy finishes that can cause glare or reflect heat onto neighbours.
5. Check compatibility with your existing roof material (metal, tile, concrete)

Extra advantage: Lighter external finishes also help reduce the local “urban heat island” effect — keeping your home and neighbourhood cooler.

External Materials and Cladding

External materials influence not only the appearance of your home, but also its thermal performance and durability in the tropics.

• Ventilated cladding systems (like weatherboards or battened panels) allow air to circulate behind walls, reducing trapped heat.
• Lightweight materials such as fibre cement, treated timber, or insulated panels perform well when shaded and ventilated.
• Steel framing can be termite-resistant but should be insulated to reduce heat transfer.
• Timber offers good thermal performance but must be protected from moisture and pests.

Tip: Combine durable materials with design features like large eaves, verandas, and shaded walkways to protect walls from direct sun and heavy rain.

Flooring and Underlays

Floor materials can also influence indoor comfort.

Tips:

• Polished concrete or tiles provide thermal mass that helps stabilise temperatures, especially when shaded and ventilated.
• Timber floors are cooler underfoot and allow airflow underneath if raised.
• Underlays and rugs can add insulation and comfort in key areas without trapping heat.
• Seal gaps around floorboards to reduce heat gain
• Exposed concrete and tiles outside in the direct sun will also add heat. Try to shade these with plants or shadecloth. 

Summary

When planning materials, think in layers:

• Reflect the heat with light colours and coatings.
• Block it with insulation and shading.
• Seal it with good windows and airtightness.
• Manage it with natural ventilation and smart design.

Each layer strengthens the others — and together, they create a home that stays cooler, uses less energy, and lasts longer in the tropics.

Work closely with your builder or designer to ensure sustainability is part of the process:

• Install insulation properly — gaps reduce performance.

• Seal around windows, doors and vents.

• Position ceiling fans and air conditioners for maximum efficiency.

• Minimise construction waste — reuse, recycle and donate materials where possible.

Once your renovation is complete:

• Check seals and insulation regularly.

• Clean filters on fans and air conditioners.

• Monitor energy bills and adjust where needed.

• Keep your garden growing — trees and shade make a big difference to indoor comfort.